USE

Visualization

This type of heading is viewed like all the headings: see Heading.

calculation

Duration

The value of the Result heading, of the Duration Operation type, between the >Heading1 and Heading2 headings is the result of the following calculation:

Result = Heading2 - Heading1

Example 1: with all the daily headings

Heading2

 

Heading1

 

Result

11/03/2018

-

10/03/2018

=

1 J

Example 2: with all the hourly headings

Heading2

 

Heading1

 

Result

11/03/2018 00:00

-

10/03/2018 12:00

=

12 H

Formula

The value of the Formula Operation heading is the result of all calculations using one of the operators.

Examples

Result=round(Heading1)

Heading1

Result

0.5

1

Result=ceil(Heading1)

Heading1

Result

0.3

1

Result=floor(Heading1)

Heading1

Result

1.5

1

Result=min(Heading1,Heading2)

Heading1

Heading2

Result

1.5

1

1

Result=max(Heading1,Heading2)

Heading1

Heading2

Result

1.5

1

1.5

Color of resources

Resources can take the colors of thresholds of an operation type of heading in the different views.

Threshold constraints

When modifying the planner’s events, the thresholds of headings of the Operation type are verified:

If the user does not comply with a warning type of constraint, the following message is displayed:

The user can then choose:

  • to comply with the constraint by clicking on the No button. The modification will not take effect.

  • or not to comply with the constraint by clicking on Yes. The modification will take effect.

The Yes for all button means no constraints will be complied with if several are applied.

If the user does not comply with a forbid constraint, the following message appears:

In this case the user cannot take any action, apart from clicking on the OK button. The modification of events that generated this message does not take effect.

Inclusion in the other Operation type headings

An Operation type of heading can be used to calculate another Operation type of heading.

See Prerequisites above

Display of totals in a Resources View

In a Resources View, in table mode, the totals of operation type headings can be displayed.

To do so, simply check the “Display totals” box in the window for editing view display settings.

ghostghostghostghostghost
loading table of contents...